Refer to the exhibit. Which resolve is a broadcast address for among the subnets that are displayed in the exhibit?
You are watching: What does vlsm allow a network administrator to do?
In the network shown in the graphic, three bits were borrowed from the host portion of a class C address. How many valid host addresses will certainly be unused on the three point-to-point links combined if VLSM is not used?
4. I m sorry of the following are had in the routing updates of classless routing protocols? (Choose two.)
next hop router interface
unicast host address
Layer 2 address
Refer come the exhibit. The network administrator desires to produce a subnet because that the point-to-point connection between the two routers. I beg your pardon subnetwork mask would provide enough addresses for the point-to-point attach with the least number of wasted addresses?
6. What does VLSM allow a network administrator to do?
utilize one subnet mask transparent an autonomous system
utilize multiple subnet masks in the same IP attend to space
utilize IGRP as the routing protocol in whole autonomous system
utilize many routing protocols in ~ an autonomous system
7. I beg your pardon three internal routing protocols assistance VLSM? (Choose three.)
8. I beg your pardon of the following difficulties does VLSM assist to alleviate?
the shortage that IP addresses
the difficulty of assigning static IP addresses to hosts in huge enterprises
the intricacy of implementing advanced routing protocols such together OSPF and also EIGRP
the shortage of network administrators default in the usage of RIP v1 and also IGRP
Refer to the exhibit. A network technician beginning the static path in R1 essential to reach network 10.1.1.0/24. A ping native the S0/0/0 interface on R1 to hold B fails. The technician starts testing the network and has the complying with results: 1. Pings from R1 to the S0/0/0 user interface on R2....successful 2. Pings native R1 to the Fa0/0 user interface on R2....successful 3. Pings from hold B to hosts on the 10.1.1.0/24 network....successful 4. Pings from organize B to the Fa0/0 interface on R2....successful 5. Pings indigenous R2 to host B....successful. What is the likely reason of the failure of the ping from R1 to hold B?
The default gateway on hold B is not appropriately set.
There are no routes ago to networks connected to R1 native R2.
There is a class 2 problem in between R2 and host B.
Host B has a defective Ethernet card.
10. A network administrator is tasked with dividing up a class C network among the QA, Sales, and administration departments. The QA room is consisted of of 10 people, the Sales is made up of 28 people, and also the administration has 6. Which 2 subnets masks adequately address the QA and also Sales departments? (Choose two.)
255.255.255.252 for QA
• 255.255.255.224 for Sales
• 255.255.255.240 because that QA
255.255.255.248 because that QA
255.255.255.0 because that Sales
Refer come the exhibit. A network technician is summarizing the two groups of routes on router R1 displayed in the exhibit. I beg your pardon summarization will work-related for every the subnets?
A course C address has been assigned for use in the network presented in the graphic. Using VLSM, which bit mask should be offered to administer for the number of host addresses required on Router A, while wasting the fewest addresses?
Refer come the exhibit. In the network that is shown, the router interfaces are assigned the very first address in every subnet. I m sorry IP resolve would it is in usable for a hold on among the LANs in this network?
Refer come the exhibit. What subnet mask will certainly be applied if Router A sends out a RIPv1 update for the network 172.16.1.0 come Router B?
Refer come the exhibit. The number of required host addresses because that each subnet in a network is provided in the exhibit. This number contains the host deal with requirements for all router ports and hosts on that subnet. After ~ all device and router port address assignments are determined, what will be the total variety of unused host addresses available?
An extr subnet is required for a brand-new Ethernet link between Router1 and Router2 as presented in the diagram. I m sorry of the following subnet addresses deserve to be configured in this network to administer a preferably of 14 useable addresses for this attach while wasting the fewest addresses?
17. What is a supernet?
the network for a default route
a summarization the classful addresses
a network that has both private and also public addresses
a collection of discontiguous networks the are managed by one ISP
Refer to the exhibit. A network administrator demands to develop two subnetworks from 10.0.0.0/8 for a router running RIPv2. The Admin subnet needs 120 hosts and also the Sales subnet requires 58 hosts. The network administrator assigned 10.0.1.128/25 to the Admin subnet. The Sales subnet is offered 10.0.1.192/26. What will be the result of this addressing scheme?
Because RIPv2 walk not assistance VLSM, the subnet masks will certainly not be allowed.
The subnets will certainly not have sufficient host addresses because that the provided network requirements.
The subnets overlap and will be rejected by the router.
The router will assistance the addressing scheme.
See more: Why Did People Distrust Doctors During The 18Th And 19Th Centuries? ?
19. A router has a review route to network 192.168.32.0/20 installed in its routing table. What range of networks space summarized by this route?
192.168.0.0 – 192.168.32.0/24
192.168.0.0 – 192.168.47.0/24
192.168.32.0 – 192.168.47.0/24
192.168.32.0 – 192.168.48.0/24
192.168.32.0 – 192.168.63.0/24
Refer to the exhibit. The network administrator desires to minimization the number of entries in Router1’s routing table. What have to the administrator implement on the network?
private IP addresses
Refer to the exhibit. What subnet mask will be used by router B once it receive a RIPv1 upgrade for the network 172.16.1.0?
Refer come the exhibit. A network technician beginning the static course in R1 essential to reach network 10.1.1.0/24. A ping indigenous R1 to hold B fails. The technician starts testing the network and has the following results:
1. Pings native R1 come the S0/0/0 interface on R2....successful 2. Pings native R1 to the Fa0/0 user interface on R2....successful 3. Pings from organize B to hosts on the 10.1.1.0/24 network....successful 4. Pings from hold B to the Fa0/0 user interface on R2....successful 5. Pings from R2 to host B....successful