The handles on the Toyota Sienna van rest frequently. The manage is made the end of pot steel that is not as solid as steel or other metals. If friend forget come unlock your auto or the door is frozen in the winter time and you pull on the door handle, it will certainly break. Sometimes the take care of will break from regular wear or because that no reason at all. To change the door take care of on a Toyota Sienna valve is no so difficult to do, simply time consuming.

You are watching: How to replace toyota sienna driver door handle


*

eliminate the door panels. Pull up the armrest, that will uncover two big Phillips screws and take castle out. Pull off the circular cover near the mirror. Lift up the window control panel near the front, and take turn off the connector and also panel. Eliminate the reduced panel and disconnect the light once you obtain the dashboard off.


*

remove the screw native the inner manage bezel. It will not come turn off yet. To remove the lock handle bezel, pry out the top and also bottom that the handle. To eliminate the bezel, push it to the inside towards the door handle and also push off. Remove the top part of the door dashboard .


*

remove the plastic wind cover native the door. Take the black plastic cover off the door jamb. This will reveal a 10 mm bolt. Remove it, but don"t autumn it inside the hole in the door. Pull back the yellow clip the releases the lock opening and also the rod to the handle. Within the huge hole you will view two10 mm bolts, a right and left. Eliminate the right 10 mm bolt. The left handle bolt stop the lock cylinder in place, it can be removed as soon as the handle is removed. Move the handle to the left and pull it out. Eliminate the lock cylinder.


*

location the lock cylinder in the brand-new handle and also install the 10 mm bolt. Insert your brand-new handle in the door and attach the two10 mm bolts and also tighten. Change the lock and also handle relax rod and also secure the yellow clip. Examine the door to check out if that opens and closes. Change the black color plastic cover in the door jamb.


*

change the plastic wind cover come the within of the door. Plugin the light and replace both door bottom and top panels, being sure that you line up the plastic clips come the corresponding holes in the door. Take it the hoe of your hand push all clips all the way in.

See more: What Is The Goal Of The Firm ? Objective Of The Firm


Replace every the Phillips screws in the door panel including the 2 under the armrest. Replace the armrest and the inside handle cover and also install the screws.


Philip screwdriver set flat screwdriver Trim device 1/4 customs socket collection 1/4 customs long expansion 1/4 customs swivel Rags