The Chrysler Town and Country minivan has been manufactured due to the fact that 1990 and finished manufacturing with the 5th generation. The Chrysler Town and also Country dashboard warning lamp detailed listed below cover the fourth generation (Mk 4, 2001-2007) and the final 5th generation (Mk 5, 2008-2016). Dashboard instrument cluster layout and warning light place vary depending on the year of manufacture and also model of her Town and Country minivan.

You are watching: Chrysler town and country dashboard warning lights


SymbolWarning Light description / Action
\"*\"
Airbag
The Chrysler Town and also Country airbag warning irradiate illuminates initially when the ignition is rotate on for approximately 4 come 8 seconds. If the airbag warning light fails to come on at all, continues to be on or comes on once driving, there\"s a fault v the system. A warning chime may also be heard depending on your model of Town and Country. Airbags deploy in the occasion of an accident in addition to seat belt pretensioners that room designed to eliminate the slack indigenous the seat belt in the occasion of a collision. Both these systems might fail come operate. Seek assistance from a Chrysler workshop as soon as possible.
\"*\"
BRAKE
The Chrysler Town and also Country brake warning irradiate monitors various brake attributes such as:▷ The parking brake is applied▷ The brake fluid level is low▷ Hydraulic brake mechanism malfunction▷ Brake BoosterWhat come doIf the brake warning light stays on and also the parking brake is totally released, the may show that brake liquid level is low. Check under the hood because that the brake fluid reservoir and also look on the tank for the MIN and also FULL mark. If fluid levels room low, optimal up through fluid. Chrysler recommend using Dodge/Mopar period 3. If period 3 brake fluid is no available, then period 4 is acceptable. Ensure friend clean the height of the reservoir tank prior to removing the lid to protect against contamination. If the irradiate still stays on ~ the parking brake is fully disengaged and also the brake fluid level is in ~ the complete mark, there may be a problem with the hydraulic brake system or brake booster. The brake booster mechanism helps to increase brake pressure as soon as the driver presses the brake pedal. If it\"s a fault through the brake booster system, the ABS mechanism will proceed to run throughout normal braking and a pulsating sensation will certainly be noticed while braking. Have system confirm by a Chrysler workshop immediately.Flashing brake warning lightIf the brake warning light flashes, examine the the brake liquid levels. The warning light may temporarily flashes as soon as traveling round spicy corners. This is as result of fluid levels transforming whilst cornering.Canadian modelsCanadian models the the Chrysler town & country minivan van will display screen the brake warning light:
\"*\"
\"*\"
ABS
The Chrysler Town and also Country Anti-Lock Brake device (ABS) warning irradiate monitors the system and also comes on for around 4 seconds as soon as the ignition is switched on. Essentially, ABS is an extension of typical brakes that avoids wheels from locking up throughout hard braking. This in turn permits the driver to continue to steer. If the ABS light continues to be on or comes on as soon as driving, the anti-lock portion of the brake device is not functioning and the system requires a service. However, traditional braking will run as normal giving the brake warning light is not on. If the ABS warning light remains on, have the system serviced by a Chrysler workshop as soon as feasible to gain back this security feature.NoteIf the ABS irradiate does not turn on when the ignition switch is put in the ON/RUN position, the dashboard bulb may require replacing.
\"*\"
EBD
The illumination of both the brake and also the ABS warning irradiate simultaneously method there\"s a fault through the electronic Brake Force circulation (EBD). EBD different the amount of brake pressure per separation, personal, instance wheel and applied higher brake force to wheels that require it. The system helps to increase auto stopping ability. If both this warning lamp come on together, have actually your car repaired as shortly as feasible as braking capacity will it is in reduced.

\"*\"
Battery
The Chrysler Town and also Country battery warning light come on at first with the ignition switched ~ above to show the status of the charging system. If the battery warning light continues to be on or come on once driving, it method there\"s a fault v the charging system and also the battery is not being charged. As soon as the battery becomes tired of charge, the engine might stop. Automatically turn off any kind of nonessential electrical tools to conserve battery charge. It\"s advised to make your method immediately to a car repair workshop.
\"*\"
Coolant
The Chrysler Town and also Country engine coolant warning light alerts of one overheated engine condition. If while driving the light transforms on, safe pull off the road and also stop the vehicle. If the wait conditioning system is on, move it off, change the transmission into neutral and leave the engine idling. Transforming the heating as much as maximum will aid to remove heat from the engine. If the warning light stays on, switch off the engine. Permit several minutes because that the engine to cool and check coolant levels. If levels room low, optimal up the coolant reservoir tank. Although making use of tap water isn\"t recommended, it can be offered in one emergency situation. After this situation, the coolant system might require flushing and also recommended Dodge/Mopar antifreeze installed.
\"*\"
ETC
The Chrysler Town and also Country red lightening bolt price is the digital throttle manage (ETC) warning light. If a problem is detected when the engine is running, the light will either continue to be on or flash depending upon the fault. Car is normally drivable with the and so on light on. Stop the vehicle and place the transmission right into \"Park\" and restart the engine. If the and so on warning light remains on, things to inspect are:▷ Battery - The battery if old and losing charge is a usual fault because that the etc light come come on.▷ Alternator - have the alternator / generator confirm for power output.▷ The throttle body requires cleaning.▷ electronic throttle human body sensor needs replacing.Flashing etc lightIf your Chrysler Town and Country electronic throttle control light is flashing, the engine might enter lessened power mode. This is a software override safety function that help to avoid damage. Other symptoms might involve rough idling or greater engine revolutions. In certain situations, the engine may stall and the vehicle requires towing. If the etc warning light flashes, have actually the auto serviced immediately. Fault codes will certainly require analysis by diagnostic equipment.
\"*\"
Oil Pressure
The Chrysler Town and Country oil warning light shows low oil pressure. Push within the engine is required to permit oil come circulate and sufficiently lubricate internal components. Short oil pressure avoids this and also can result in far-ranging engine damage. If the low oil press warning light come on together with a warning chime, pull off the road and also switch turn off the engine as shortly as possible.NoteThis warning light is not a recommendation to short engine oil levels. Perform not run the engine and also call a Chrysler workshop because that assistance.
\"*\"
Security
The Chrysler Town and Country vehicle security irradiate (red dot) will flash at a rapid rate for around 15 seconds as soon as the vehicle security alert is arming, and also then will flash slowly until the car is disarmed.Unable to begin the vehicleIf you are unable to start the van and also the protection light remains on. Try:▷ Disconnecting the battery for 15 to 20 minutes.▷ SKIM module analysis the crucial - SKIM (Sentry crucial Immobilizer) receive the radio frequency password from the key. Relations can end up being loose, call for fixing or replacing the module.▷ SKIM detects an invalid key / code the warning light will commonly flash.▷ SKIM detects a malfunction, the light will certainly usually remain on / solid.▷ check / replace battery in key. Shot a preventive key.

\"*\"
Transmission
The red cog and thermometer symbol is the Chrysler Town and also Country infection temperature warning light. It means the transmission is overheating.WarningContinuous driving v the transmission temperature warning light on will result in serious transmission damage or full failure. Continuous driving can also result in engine fire.What come doIf the warning light comes on when driving, for sure pull off the road, change the transmission into neutral and permit the engine to operation at idle till the warning light goes out.
\"*\"
ESC
The ESC, or digital Stability regulate system is a security driving help that increases vehicle stability when traveling ring corners and when accelerating. The ESC warning light may come on for the complying with reasons:▷ The ESC turn off warning light and the ESC warning light come top top momentarily each time the ignition switch is turned come ON/RUN. This is a bulb / system check.▷ The ESC warning light remains on constantly v the engine running method a breakdown has to be detected. The warning light might go out after an engine restart and ESC device reset. If the warning light stays on after number of ignition cycles, for several miles and also after the automobile has been pushed at a rate of 30 mph (48 km/h) or more, have your automobile serviced. Diagnostic devices is required however it might relate come ABS / sensors.▷ ESC warning light flashes way the mechanism is in operation and also is stabilizing the vehicle. A clicking or buzzing sound may be noticed. This is normal and will stop as soon as ESC is instantly deactivated.NoteESC which has traction manage can be manually switched off. This is only beneficial if the auto is stuck in mud, snow etc. ESC is switched on by default at every engine start.
\"*\"
Check Engine
The Chrysler Town and Country inspect engine warning light or breakdown indicator irradiate (MIL) is component of one Onboard Diagnostic System dubbed OBD II. The system is designed to monitor the engine, exhaust emissions and the automatically transmission. The check engine warning light is a generic symbol the has numerous potential faults linked with it. The only means to situate a fault is to have diagnostic tools hooked up to the auto which should display fault codes. The inspect engine light might either come on constantly or flash.▷ If the examine engine warning light stays on constantly, you can usually continue to drive the vehicle. Stop high speed, high engine loads and also have the vehicle serviced as soon as possible. The most usual reasons for the check engine irradiate to come on constantly are: • A loosened / damaged / lacking gas cap. • poor quality fuel. • Faulty oxygen sensor. • Faulty mass air flow sensor. • Spark plugs / engine wiring.▷ If the check engine warning irradiate is flashing, the situation becomes much more urgent as engine damage may result. This is regularly an clues of engine misfire that method unburnt fuel can go into the mechanism causing extreme heat in the catalytic converter. Symptoms can include warning lights, decreased engine power and also rough sounding engine. Immediately reduce speed and avoid high engine loads. If the light stays on, have the engine checked immediately by a qualified workshop.
\"*\"
Tire Pressure
The Chrysler Town and also Country tire push warning light will illuminate ~ above the dashboard together with an audible chime to alert you that one or an ext tires have actually lost pressure over the set values. If this warning light comes on, avoid as quickly as possible to inflate or readjust tires. Driving with under-inflated tires rises the threat of a blow-out, boosts tire wear and also increases fuel usage. Poor car handling may additionally occur.Inflating tiresThe recommended tires pressures are discovered on the placard inside the driver\"s door. This is based upon cold tires. If inflating warm tires, the pressure might need come be raised up to secondary 4 psi (30 kPa) over the encourage cold placard push in stimulate to rotate the Tire pressure Monitoring mechanism (TPMS) irradiate off. ~ inflating tires, you may need to drive for as much as 10 minutes at a speed of 15 mph (24 km/h) or more for the system to readjust and the warning irradiate to automatically go out.TPMS faultIf there\"s a fault with the system, the warning light will flash for about one minute then continue to be on. A warning chime may additionally alert you. In this state, the TPMS might not worn the under-inflated tyres. Possible TPMS faults can take place due to: • Radio wave jamming as result of electronic gadgets or driving next to framework emitting the same radio frequencies together the TPMS sensors. The system will be revitalized when the automobile is removed from the area. • installation some form of aftermarket home window tinting the affects radio wave signals from reaching the receiver. • build-up of too much snow and/or ice around the wheels or wheel housings. • utilizing tire chains on the vehicle. • each tire has a sensor fitted within it. Using wheels/tires no equipped with TPMS sensors will reason a fault light to illuminate.

See more: Which Logarithmic Equation Is Equivalent To The Exponential Equation Below


8 thoughts on “Chrysler Town and also Country Dashboard Warning Lights”


\"*\"

Anonymous

7th march 2020 at 9:27 pm

I have actually chrysler 300 and also cannot discover the warning light codes. This is a problem for me and also feel like never purchasing a chrysler again.


Reply
\"*\"

Anonymous
15th June 2020 in ~ 9:24 pm

We have a warning signal i m sorry looks choose the back hatch is opened up with a bolt kind screw aiming to walk in. This is top top a 2014 city & Country. In backing up there is a slim scraping sound – does this median that something is loose. This warning photo is not in the hand-operated – so can you aid us. TXS