You are watching: Can thompson water seal be painted over
I live in Pennsylvania and also built a new deck using pressure treated lumber. Ns stained the whole deck through Thompson"s Water Seal semi-Transparent forest cedar critical summer. Deserve to I paint over the waterproofing stain? If no what would I need to do so I could paint the deck and also have the repaint hold and also last? Water doesn"t bead up and it"s not as slippery when wet favor it did when I very first applied the stain.
Thompson"s is pure garbage. Push washing will take turn off what tiny of the coating the is quiet present. Then use a actual product.......Cabot, Sikkens, SW Deckscapes, etc. Perform NOT apply PAINT to A DECK!More advice and assist here:www.deckstainhelp.com
You should apply a cleaner and pressure to wash it getting the angles and gaps, etc. Rinse. Permit dry. Sand surface with 80 grit record on an orbit sander, hooked approximately a shopvac or dust extractor. Because that the deck surface I would acquire it sanded 90% clean or better. Handsand pickets or usage a $30 skil "octo" sander to with all that stuff.Most important, perform you desire solid shade or transparent stained look?For solid color, find and also buy Proluxe Rubbol Solid color stain, and also use a 6" stainer brush come apply and brush out 2 coats. This hard opaque shade will have actually a short sheen to it.For transparent there space a few good brands and products.
Does the TWS tho bead water? that is the true test as to how well it will certainly accept a new stain. I agree there space a lot much better stains available! Paint can initially last much longer than a deck stain yet adds too lot prep work when it comes time to repaint.I usually just usage a bleach solution and also a press washer to get a deck
You should use a cleaner and pressure to wash it getting the angles and also gaps, etc. Rinse. Permit dry. Sand surface ar with 80 grit file on an orbit sander, hooked approximately a shopvac or dust extractor. For the deck surface ar I would get it sanded 90% clean or better. Handsand pickets or usage a $30 skil "octo" sander to with all the stuff.Most important, carry out you want solid color or transparent stained look?For solid color, find and also buy Proluxe Rubbol Solid shade stain, and use a 6" stainer brush to apply and also brush the end 2 coats. This hard opaque shade will have a low sheen come it.For transparent there room a couple of good brands and also products.
See more: How To Evolve Haunter To Gengar ? How Do You Evolve Haunter In Fire Red
Hey man, nothing against sanding decks under or anything, however you"re acting prefer its a vital step, as soon as its not, particularly if they can be doing a solid shade stain. Im certain it looks a little much better if you carry out sand every little thing down, yet this is a DIY forum, and people right here are most most likely to not desire to spend all the extra time and money simply to make it look at a little better. With a great pressure wash, and maybe some wood brightner, many decks will certainly look quite close to brand-new after a fresh stain. The general ascendancy is, if they desire a lighter color stain, strip it, if its the same shade or darker, dont. Simply make the clear to people when you offer advice, cuz they might end up thinking that if they not sand it, the stain no stick or something. Im sure your decks come out looking a little far better than mine, but Im okay v it spring 95% brand-new if it saves me two days worth of work, and also the clienta thousands or for this reason bucks. I would at least give people an option.