This is an connected process. Here is what i was able to discover for you. Ns hope it helps.1.Before servicing the vehicle, refer to the Precautions Section. 2.Loosen the strut facility nut 5 turns. 3.Loose the wheel hub retaining nut. 4.Remove or disconnect the following: former wheel Wheel speed sensor, if fitted Hub retainer nut. Note the nut. Brake caliper and also rotor external tie rod end Lower ball joint 5. Separate the wheel hub from the halfshaft using a perfect puller. 6. Eliminate the steering knuckle pinch bolt 7. Release the knuckle utilizing a perfect lever and remove indigenous the vehicle. 8. Remove the wheel hub and outer bearing race making use of Special device 205-D064 9. Eliminate the bearing inner ring making use of Special devices 204-180 and also 205-D064 10. Remove the snapring native the knuckle. 11. Reassemble the bearing cage come the bearing inner and install come the wheel knuckle. 12. Utilizing Special tools 205-153, 204-023 and 206-054, eliminate the bearing external ring from the wheel knuckle. Fig. Removing hub utilizing a perfect puller

*

Fig. Removing outer bearing race utilizing puller 205-D064

*

Fig. Removing the bearing within ring utilizing Special tool 204-180

*

Fig. Remove the bearing outer ring indigenous the wheel knuckle

*

to install: 1.Press the bearing right into the hub making use of Special tools 205-153 and 205-140. Fig. Installation the bearing right into the hub v installer 205-140

*

2. Download the snapring. 3. Press the hub into the wheel bearing utilizing Special devices 205-153, 204-023 and also 206-054. 4. Attract the stub shaft into the wheel hub with Halfshaft installer 205-379. 5. Download or attach the following: Steering knuckle. Tighten the pinch bolt to 66 ft. Lbs. (90 Nm). Lower ball joint. Tighten the pinch bolt to 37 ft. Lbs. (50 Nm). Outer tie rod end. Tighten the seed to 35 ft. Lbs. (48 Nm). Brake caliper and rotor Hub retainer nut. Tighten the nut on 2002-04 models come 232 ft. Lbs. (316 Nm). Tighten 2005 Models to 199 ft. Lbs. (270 Nm). Wheel speed sensor, if fitted Front wheel 6. Tighten the strut facility nuts together follows: A. 2002-04 Models: 35 ft. Lbs. (48 Nm) B. 2005 Models: 22 ft. Lbs. (30 Nm). 7. Examine the wheel alignment and change as necessary. ns hope the helps.


You are watching: 2002 ford focus front wheel bearing


See more: Chapter 11 The Outsiders Chapter 11 Questions And Answers, The Outsiders Chapters 11

It"s the ideal I could find because that you on the net. Permit me understand if girlfriend have particular questions.Joe