the on lower left side of transmission. Examine out the diagrams (Below). Please let us know if you require anything else to obtain the difficulty fixed.

*




You are watching: 2000 jeep cherokee neutral safety switch location


my jeep cherokee periodically doesn"t desire to communicate the starter as soon as I try to begin it. Even with lot of of battery power. Might it it is in the neutral safety switch? whereby is that located?

could be the ignition switch/transmission variety sensor/starter relay/starter itself-below will assist you uncover it

*

*



obtained a 00 grand cherokee through v8. Ive checked various other posts and also cnt uncover anwer. Ive rplaced battery, checked fuses, relays and also wires and nothing. As soon as I try starting it simply clicks. Did begin twice while investigate problem. Checkd strength at starter and also was good except the smaller wire I had actually someone turn an essential while i tested and also got nothing. Do the efforts jumping the starter and also still nothing. Biengs its click does that median my neutral safety and security switch is working properly? If it to be the NSS would certainly it throw a examine engine light? and shouldnt i be obtaining voltage on both wires in ~ starter while turning key?
*

*

If you run the starter and also nothing that s method starter no good But make sure you are working through a completely charged batteryEven if the lights comes on it doesn t mean the battery is solid enough to start the engine. If the s click its no the N/S switch here what I have for wiring on that

Yup its a brand brand-new battery. I confirm voltage and its fine. I have tried jumping it and it dont even budge. Ns do think its the starter im jus make the efforts to do sure prior to I reomve it biengs the in a tight spot. My problem is ns was analysis in the haynes manual and also it stated to organize test light on solinoid wire at starter and have someone turn vital and should gain voltage. Ive tried that and didnt obtain anything except on the larger wire, which has 12v all the time. Might it still it is in the starter? also is the as big of a pains to eliminate as the looks? i m really sorry to it is in so questionable and also thanks because that the rapid replys!
If you notification on the starter you have two places where wires attach to itOne should have battery positive at every time and also the tiny one it have to be just when key turn to startIf you shot and it is provided battery strength to the little wire the starter must engage and also turn the engine the if the starter is good If it doesn t 8 out of 10 it s the starter Or check to make certain you have good ground top top the engineKnow if the does begin You have to look in ~ the wiring diagram and also trace the starter wireLook for relay in the relay boxLet me know exactly how you make out on that
It"s on the transmission, i didn"t watch a location picture. Look at the wire colors top top the connector.

*


Both are situated on the side of trans alongside the shifter linkage

*

if you have actually the 30RH infection then you need to unplug the switch and also unscrew that from infectious diseases worldwide put brand-new one in and plug earlier in

*

and if you have the AW-4 transmission then girlfriend unplug and remove the bolts that hold it on and put the new one top top bolt in place and plug ago in


See more: C&Amp;C The First Decade - C Programming Language, 2Nd Edition

Signal native neutral security switch causes engine check light come come on. I"ve changed the neutral safety switch, but light continues to be on. The wires were inspect for present from trans to computer. Every terminals in the move had required amount of electric current, other than the reverse position. It had actually no current. Mine mechanic claimed that"s the reason of the light, and also he assumed the reason might be inside the transmission. Is there a connection inside the trans native the transition lever that stays clear of from circuit from closing/opening, The light come on shortly after the trans fluid was changed, no flushed. The jeep just starts in park and also neutral together it should. The trans works perfectly. The jeep has actually 146,000 kms, and also I doubt from the shade of infectious diseases world fashion fluid, it had actually not been readjusted for years. I would really appreciate some help.